MIL-DTL-43455K
except double-lapped and double-stitched seams where 1/2 inch allowance is provided and for joining
sleeve facing to bottom of sleeve where 1/4 inch allowance is provided, will be furnished by the
Government to the contractor for cutting the working patterns. The working patterns shall be duplicates of
the Government patterns which show size, placement of [pockets and notches for proper assembly of all
parts. The Government patterns and working patterns shall not be altered in any way.
3.5.2 List of pattern parts. The components of the coat shall be cut from materials specified in
accordance with the number of parts indicated in Table I.
TABLE I. List of pattern parts
Material
Nomenclature
Cut Parts
Coat
Basic material (see 3.3.1)
Front
2
Back
1
Left front facing
1
Right front facing
1
Top sleeve
2
Undersleeve
2
Bottom sleeve facing
2
Topcollar
1
Undercollar
1
Breast pocket
2
Breast pocket flap
2
Breast pocket flap lining
2
Lower pocket flap
2
Lower pocket flap lining
2
Lower hanging pocket 1/
2
Lower pocket bearer 1/
2
Lower pocket welt
2
Waist tunnel strip 1/ 2/
1
Sleeve tab
4
Cloth, cotton buckram (see 3.3.4)
Collar interlining 3/
1
Cloth, fusible (see 3.3.4)
Collar interlining (alternate)
1
Lining
Cloth, cotton/nylon oxford
Front
2
(see 3.3.2)
Back
1
Top sleeve
2
Under sleeve
2
Neck reinforcement 4/
1
Front interlining
2
Cloth, fusible (see 3.3.2)
Front interlining (alternate)
2
Cloth, cotton/nylon oxford
Hood
2
(see 3.3.3)
Cloth, nylon, knitted (see 3.3.5)
Hood curtain
1
9
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business