MIL-DTL-43455K
AMERICAN SOCIETY FOR TESTING AND MATERIALS
ASTM-D-6193 - Standard Practice for Stitches and Seams
(Copies of these documents are available from the American Society for Testing and Materials, 100 Barr
Harbor Drive, West Conshohocken, PA 19428-2959 or from www.astm.org.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)/AMERICAN SOCIETY
FOR QUALITY (ASQ)
ANSI/ASQ Z1.4 - Sampling Procedures and Tables for Inspection of Attributes
(Copies of these documents are available from the American National Standards Institute, 1430 Broadway,
New York, NY 10018-3308 or from www.ansi.org.)
NATIONAL AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC.
NASM 20652/1 - Eyelets, Metallic, Rolled Flange Type and Eyelet Washer
(Copies of these documents are available from the Aerospace Industries Association, 1000 Wilson
Boulevard, Suite 1700, Arlington, VA 22209-3928 or from global.ihs.com/?RID=AIA)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 6.3) in accordance with 4.3.
3.2 Sample. Samples, when furnished, are solely for guidance and information to the
contractor (see 6.4). Variation from this specification may appear in the sample, in which case this
specification shall govern.
3.3 Recycled, recovered or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided that the
material meets or exceeds the operational and maintenance requirements, and promotes economically
advantageous life cycle costs.
3.3.1 Basic material.
3.3.1.1 Class 1. The basic material for the class 1 coat shall be Olive Green 107 conforming
to class 2 of MIL-DTL-43191. The material for the hanging pockets shall be Olive Green 107 conforming
to class 2 or dyed to ground shade conforming to class 3 of MIL-DTL-43191.
3.3.1.2 Class 2. The basic material for the class 2 coat shall be woodland camouflage printed,
conforming to class 3 of MIL-DTL-43191. The material for the hanging pockets shall be woodland
camouflage printed conforming to class 3, ground shade conforming to class 3 or Camouflage Green 483
conforming to class 2 of MIL-DTL-43191. As an alternate, printed seconds are allowed for the field coat
on parts not visible as worn which include the lower hanging pocket, waist tunnel and lower pocket bearer.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business