MIL-DTL-43455K
Printed seconds cloth shall be cloth which has been rejected only for defects pertaining to color, infrared
reflectance or camouflage printed pattern.
3.3.1.3 Class 4. The basic material for the class 4 coat shall be desert camouflage printed (3
color), conforming to class 5 of MIL-DTL-43191. The material for the hanging pockets shall be desert
camouflage printed (3 color) conforming to class 5 or ground shade conforming to class 5 of MIL-DTL-
43191.
3.3.1.4 Class 5. The basic material for the class 5 coat shall be universal camouflage printed
conforming to class 6 of MIL-DTL-43191. The material for the hanging pockets shall be universal camouflage
printed conforming to class 6 or ground shade conforming to class 6 of MIL-DTL-43191.
3.3.2 Lining. The material for lining the coat and interlining the fronts shall conform to class
2 of MIL-C-3924. The color for class 1 shall be Olive Green 107, for class 2 shall be Camouflage Green
483, for class 4 shall be Tan 380 and for class 5 shall be Foliage Green 504. As an alternate for the
interlining, a fusible interlining conforming to type V, class 3, style B of MIL-C-44296 may be used. As an
alternate finished seconds and mill seconds finished firsts may be used for top sleeve and undersleeve lining
only. Mill seconds may contain shade variations from the standard sample. Mill seconds finished firsts
may contain slubs or pulls in accordance to MIL-C-3924, paragraph 4.4.2.1 sears fabric scale for slubs and
FED-STD-4 for pulls.
3.3.2.1 Alternate interlining. As an alternate to the material specified in 3.3.2, the material for
lining and interlining the class 2 coat shall conform to class 2 of MIL-C-3924. The color of the material
shall be OG-107.
3.3.3 Cotton-nylon oxford. The material for the hood for the class 1 coat shall be Olive Green
107 conforming to class 2 of MIL-C-3924, for class 2 coat shall be woodland camouflage printed
conforming to class 3 of MIL-C-3924, for class 4 coat shall be desert camouflage printed (3 color)
conforming to class 5 of MIL-C-3924 and for the class 5 coat shall be universal camouflage printed
conforming to class 6 of MIL-C-3924.
3.3.4 Buckram. The material for interlining the collar and reinforcing snap fasteners,
buttonholes and eyelets (see Table II, operation 1.k.) shall be cotton buckram conforming to type I, natural
or bleached of A-A-50186. As an alternate, a fusible material for interlining the collar conforming to type
V, class 3, style B of MIL-C-44296 may be used.
3.3.5 Knitted cloth. The knitted cloth for the hood curtain shall conform to class 1 of MIL-C-43247,
except that the class 1 shall be Olive Green 107, class 2 shall be Camouflage Green 483, class 4 shall be
Tan 380 and class 5 shall be Foliage Green 504. Colorfastness requirements for MIL-C-43247 shall not
apply.
3.3.6 Cotton tape. The tape for the collar tab shall be 1 inch wide cotton tape conforming to type I, class
8 of MIL-T-43566. The color of the tape for class 1 shall be Olive Drab 7, for class 2 shall be Camouflage
Green 483, for class 4 shall be Tan 380 and for class 5 shall be Foliage Green 504.
3.3.7 Fasteners, nylon tape. All fastener tapes for the coat shall be nylon conforming to type II, class 1
of A-A-55126. The color for class 1 shall be Olive Green 106, for class 2 shall be Camouflage Green 483,
for class 4 shall be Tan 380 and for class 5 shall be Foliage Green 504. The finished cut lengths for each
piece shall be as specified in Table II, operation 1.g, 1.h. and 1.i.
3.3.8 Braids, drawcord. The ends of the drawcords referred to in 3.3.8.1, 3.3.8.2 and 3.3.8.3
shall be dipped or impregnated with cellulose acetate or cellulose butyrate to prevent raveling. Each dipped
or impregnated end shall be a least 1/2 inch in length (see 4.4.1.1).
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business