MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
Or
c. As an option to operations 9.a and 9.b,
301 or
LSc-2
8-10
join the fronts to the back at the shoulder
401
with a double-lapped, double-stitched seam
3/16-inch to 5/16-inch gage.
10. Make protective fly
a. Fuse the interlining to the top side of
protective fly.
b. Fold the protective fly inside out.
301
SSe-2 (a)
8-10
Stitch the protective fly even with the
fold and the ends.
c. Turn and raise stitch with a single row
301
SSe-2 (b)
8-10
of stitching 1/4 inch from the
edge on the front edge and both ends.
11. Make and attach shoulder epaulet
a. Fuse interlining to top side of epaulet.
b. Stitch the 1 by 1 hook fastener tape to
301
LSbj-1
8-10
epaulet at marks on all four sides, 1/16
inch from edge.
c. Join the top and underside of the
301
SSe-2 (a)
8-10
epaulet at the sides and point with a single
row of stitching 3/8 inch from edge.
d. Turn epaulet and raise stitch with a
301
SSe-2 (b)
8-10
single row of stitching 1/4-inch gage from
edge.
e. Center the epaulet on the jacket at the
armhole and shoulder seam at the neck.
f. The epaulet shall be stitched to the jacket
301
SSa-1
8-10
1/16 to 3/16 inch from the armhole edge.
g. With epaulet flat, smooth, and centered
301
LSbj-1
8-10
on shoulder seam, mark location of loop
tape (corresponding to hook tape) and
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business