MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
b. Join the slide fastener to the left front lining
301
LSq-2(a)
8-10
with a single row of stitching ¼ inch from the edge
of the scoops. The bottom of the slide fastener stop
shall finish ½ (± 1/8) inch from the bottom.
29. Attach hanger
Position the hanger on the back panel of the
301
LSd-1
8-10
lining, centered 1 inch down from the neck
or
opening raw edge. Join with a single row of
bartack
28
stitching 1/16 inch from the edge, forming a
stitches
3/8- by 3/8-inch box, "X" stitch, or make a
per
1/2-inch-wide bartack.
bartack
30. Attach labels
Position the top of the combination identification 301
LSbj-1
8-10
and size label directly below the hanger. Position
the top of the instruction label so that it will be
centered not more than 1/2 inch below the bottom
of the combination identification and size label.
Sew the combination identification and size label
and instruction label on all four sides to the quilted
lining with a single row of stitching 1/16 inch from
edge. The top of the instruction label may be caught
in the stitching of the bottom of the combination
identification and size label.
31. Turn jacket
a. Join the outershell to the lining at the front
301
SSa-1
8-10
opening. Position the beaded edge on the slide
fastener with the edges butting when the slide
fastener is closed. Join with single row of stitching
¼ inch from edge of the scoops.
b. Join the outershell to the lining at the neck
301
SSa-1
8-10
opening with a single row of stitching 1/8 to 1/4
inch from edge.
32. Attach collar
a. Join the undercollar to the neck opening with
301
SSa-1
8-10
a single row of stitching 3/8 inch from edge.
b. Turn the raw edge of the topcollar under 3/8
301
LSb-1
8-10
19
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business