MIL-DTL-31008A
3.2.13.3 Combination size, identification, and instruction label. As an alternate to 3.2.13.1 and
3.2.13.2, a combination size, identification, and instruction label conforming to class 14 of MIL-
DTL-32075, may be used.
3.3 Design. The winter jacket shall be single breasted with a bi-swing back, and a center front
opening with a slide fastener closure and a partial protective fly. The jacket shall have two front
single welt pockets with flaps, shoulder epaulets, two inside patch pockets with pencil pocket on
each, and knitted waistband and wristlets. The flaps of the front pockets and the shoulder
epaulets shall be closed with hook and loop fastener tape. The jacket shall have hook and loop
fastener tape at the upper left for nameplate.
3.4 Patterns. Standard patterns to be used to cut working patterns will be furnished by the
Government and provide a seam allowance of 1/2 inch, unless otherwise specified. The
manufacturer's working patterns shall be identical in size and shape to the applicable
government patterns except that additional notches for use during construction are allowed on
the working patterns. Also, minor modifications are permitted where necessary when using
automatic equipment. These modifications shall not alter the dimensional, serviceability or
appearance requirements cited in the specification.
3.4.1 Pattern parts. The jacket shall be cut from the materials specified herein in accordance
with the pattern parts listed in table II.
TABLE II. List of pattern parts
Material
Pattern nomenclature
Parts Cut
Basic material
Front
2
(see 3.2.1)
Back
1
"A" bi-swing back
2
"B" bi-swing back
2
Front facing
2
Topsleeve
2
Under sleeve
2
Topcollar
1
Undercollar
1
Collarstand
2
Protective fly
1
Epaulet
4
Pocket flap
4
Pocket facing
4
Inside patch pocket
2
Pencil pocket
2
Waistband extension facing
2
Hanger
1
Pull tab
1
Lining
Front
2
(see 3.2.2)
Back
1
Topsleeve
2
Undersleeve
2
Fusible interlining
Undercollar
1
(see 3.2.3)
Collarstand
1
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business