MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
stitch on all four sides, 1/16 inch from
edge.
c. Sew flaps with face sides together with
301
SSe-2 (a)
8-10
a signal row of stitching 3/8 inch from edge.
d. Turn flaps and raise stitch with a single
301
SSe-2 (b)
8-10
row of stitching, 1/4 -inch gage from edge.
e. Hem and stitch welt facing pieces to the
301
SSa-1 or
8-10
pocketing with a single row of stitching 1/16
LSd-1
inch from edge.
f. Sew flaps on fronts at drill marks with a
301
SSa-1
8-10
single row of stitching 1/4 inch from edge.
g. Sew welt and pocketing on fronts at drill
301
SSa-1
8-10
marks below flaps with a single row of
stitching 1/4 inch from edge.
h. Cut pockets through with a diamond-
shaped tongue at corners.
i. Place pocketing through slits. Double
over at edge for reinforcement.
j. Form a 5/8 inch welt, sew tongues at
301
SSa-1 or
8-10
corners to the welt and facing on the inside
LSq-2 (b)
with a single row of stitching. Securely tack
the ends of the stitching.
k. Raise stitch around the sides and
301
SSa-1 or
8-10
bottom of the welts on the fronts with
LSq-2 (b)
a single row of stitching 1/16 inch from
edge.
l. Stitch across top of flaps and corners
301
SSa-1 or
8-10
on jackets through the pocketing with a
LSq-2(b)
single row of stitching 1/16 inch from
edge.
m. Join a 1 by 5 inch hook fastener tape
301
LSbj-1
8-10
to jacket corresponding to loop tape on
flap. Stitch 1/16 inch from edge on all four
sides.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business