MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
25. Attach waistband
a. Sew one side of the waistband to the bottom of
301
SSa-1
8-10
the outershell with a single row of stitching 1/2
inch from edge.
b. Attach the opposite edge of the waistband to
301
SSa-1
8-10
the bottom of the lining with a single row of
stitching 1/2 inch from the edge.
c. With the jacket turned inside out, join the
301
SSa-1
8-10
outershell, the lining, and the waistband between
the extension pieces with a single row of stitching
1/2 inch from edge.
d. With jacket outershell face out, fold the front
301
EFa-1
8-10
edge to the inside to the inside at the pattern marks.
Insert the cord in the fold and stitch close to the
cord with a single row of stitching. The beaded
edges shall be flush with each other when attached
to the closed slide fastener. The cord shall run the
entire length of the front opening.
26. Attach knitted cuffs
Sew the prefolded knit cuff to the bottom of the
301
SSa-1
8-10
lining and outershell sleeve terminal with a double
row of stitching 1/2 inch from edge.
27. Join slide fastener to protective fly
Position the right slide fastener tape, with the
301
SSa-1
8-10
slider attached on the protective fly with the raw
edge even with the tape edge. Join with a single
row of stitching 1/4 inch from the edge of the
scoops.
28. Join assembled slide fastener and protective
fly
a. Join the assembled slide fastener and protective 301
LSq-2(a)
8-10
fly to the front lining with a single row of stitching
1/4 inch from edge of the scoops.
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business