MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
applied at collar/collarstand seam. This
operation shall not affect the appearance or
service-ability of the end item.
b. Join the undercollar to the
301 or
LSq-2(a)
8-10
undercollarstand and the topcollar to the
401
topcollarstand, each with a single row of
stitching 1/4 inch from the edge.
c. Turn and raise stitch, with the stand
301
LSq-2 (b)
8-10
overlapping the collar, with a single row of
stitching 1/16 inch from the edge.
d. Lay heat-sealing tape over seam on
inside and heat seal.
e. Join the topcollar to the undercollar with
301
SSe-2 (a)
8-10
a single row of stitching 1/4 inch from edge.
f. Turn and force out the edges.
15. Make hanger
a. Make the hanger of the basic fabric.
301
EFp-1
8-10
The finished hanger shall be 1/2 ± 1/8 inch
wide by 3-1/2 ± 1/4 inches long.
b. Sew on each side 1/16 inch from
301
OSf-1
8-10
the edge with a single row of stitching.
16. Join inside front facing to front lining
Join front facing to front lining with a single
301
SSa-1
8-10
Row of stitching matching pattern marks.
17. Make inside patch pockets
Finished appearance. There shall be two inside patch
pockets, combination pencil pockets, one on each front
lining panel located at the pattern marks. Each pocket
shall be slanted according to pattern marks.
a. Fold the top of the pencil pocket and patch
301
Efb-1
8-10
pocket at the notches with the raw edge turned
under and stitched with a single row of stitching
1/16 inch from the edge.
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business