MIL-DTL-31008A
TABLE III. Manufacturing operations Continued.
No. Description of Operation
Stitch
Seam and
Stitches
Type
Stitching
Per Inch
Type
n. Stitch around edge of pocketing with a
301
SSa-1
8-10
single row of stitching 1/2 inch from edge.
o. Bartack the corners of each pocket
bartack
42
opening with a 3/4 -inch bartack on the inside,
stitches
catching the tongues and welt.
per
bartack
p. Lay heat-sealing tape over flap stitching
on inside and heat-seal.
6. Join fastener tape for nameplate
a. Position a 2 by 4 inch piece of loop
301
LSbj-1
8-10
fastener tape for the nameplate above the
left front pocket at the pattern marks; join
on all four sides 1/16 inch from the edge
with a single row of stitching.
b. Lay heat-sealing tape over stitching for
loop fastener tape and heat seal.
c. Affix a piece of hook fastener tape 2-
inches by 4 inches to the loop fastener
tape for use as a mounting for the wearer's
nameplate.
7. Join shoulder darts and bi-swing panels
a. Join the shoulder darts with a single
301
Osf-1
8-10
row of stitching.
b. Fold the shoulder darts to the inside,
301
LSq-2 (b)
8-10
and join with a single row of stitching
1/16 inch from the edge.
c. Lay heat-sealing tape over dart on inside
and heat-seal.
d. Join the bi-swing back panels "A" and
301
SSa-1
8-10
"B"at the outer curve with the material face
to face. Place with a single row of stitching
3/8 inch from the edge.
e. Join the bi-swing back panel "A" to the
301
SSe-2 (a)
8-10
back panel at the inner curve, with the
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business