MIL-DTL-6279M
3.2.2 Interlining. The fabric for the interlining shall be batting, Type II, Class 4, Style A, Cover
B of A-A-55127. Except that the dimensional stability test does not apply.
3.2.3. Lining. The fabric for the lining shall conform to MIL-C-18387, AF shade 1524, except
fire retardant, air permeability, cubic feet of air/minute/square foot at 1/2 inch water pressure,
and stiffness requirements do not apply.
3.2.4. Pocketing. The fabric for the inner ply of pocketing shall be of the following:
-Rayon or cotton satin cloth conforming to type 1 of A-A-52074 with the back side designated as
the face.
OR
-80% wool/20% nylon cloth, weighing 16.5 ounces per square yard, style number 9215-1555 or
equal.
The color of all fabrics shall approximate the outer shell.
3.2.5 Protective flap. The fabric for the interlining in the outer protective flap of the parka shall
conform to Type I, Class 2 of A-A-52085, cloth drill cotton
3.2.6 Thread.
3.2.6.1 Nylon. Except for stitching the knitted fabric, the thread for all sewing shall conform to
Type I or II, class A, size B of V-T-295. The thread shall be a good match to the shade of the
outer-shell fabric. The thread shall be a step 3-4 on the AATCC gray scale for color change. The
thread shall be a good match to colorfastness to light at 20 standard fading hours and
colorfasteness to wet-dry cleaning and to perspiration when tested IAW V-T-295.
3.2.6.2 Cotton. The thread for stitching the knitted fabric shall conform to type I, ticket No. 30, 3
ply of A-A-52094. The thread shall be a good match to the shade of the outer shell fabric. The
thread shall be a good match to colorfasteness to light, wet-dry cleaning and to perspiration when
tested in accordance with A-A-52094.
3.2.7 Hood.
3.2.7.1 Trimming. The hood trimming shall conform to MIL-C-43824 except that the color shall
be white.
3.2.7.2 Hood lining. The lining shall conform to Type I or Type II of MIL-C-6590 except that
the ground fabric shall be synthetic. The color of the synthetic mouton shall be a good
approximation of the approved shade of sage green (AF Shade 1530). A 3 or 4 pile denier fiber is
also acceptable for the Type I cloth provided this cloth meets all the requirements for Type I.
3.2.8 Wristlets. The wristlets shall conform to type I, Class 2, size 2 of MIL-C-3735. The color
shall be AF Shade 1525.
3.2.9 Drawcord and loops. The drawcord for the hood, the waist adjustments, and the loops on
the front closure of the parka shall conform to type II, class 2 of MIL-B-371. The braid shall
match the color of the outer-shell fabric. Each drawcord shall be 46 inches long. The ends of the
drawcord shall be tipped or impregnated with cellulose acetate or cellulose acetate butyrate to
prevent raveling. The length of the tipping or impregnation shall be approximately 5/8 ± 1/8
inch. The color of the tipping or impregnation shall be transparent or approximate the shade of
the outer shell fabric.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business