MIL-DTL-6279M
NO.
OPERATION
STCH
SEAM/STCH
STITCHES PER
TYPE
TYPE
INCH
b. Join the sleeve outseam with
a double-lapped seam with the
top sleeve overlapping the
under-sleeve, 1/4 to 5/16 inch
gage, 1/16 inch from the folded
edge.
NOTE: Elbow patches and
reinforcement pieces may be
pre-hemmed prior to attaching
to sleeves with the stitching
1/16 inch from folded edge.
10-12
LSd-1
301 or 401
c. Turn-under raw edge of cuff
reinforcement piece and stitch
to outside or face side bottom
of sleeve, in accordance with
the notches, 1/16 from folded
edge.
6-8
LSc-2
301 or 401
d. Join the inseams with a
double lapped seam with the
top sleeve overlapping the
under-sleeve 1/4 to 5/16 inch
gage, 1/16 inch from folded
edge.
10-12
LSq-3 (a) and
301 or 401
LSq-3(b)
e. Join sleeve to front and back
with a 1/2 inch seam, with front
and back overlapping the
sleeve, raise stitch 1/4 inch to
5/16 inch gage, 1/16 inch from
folded edge,
6-8
LSc-2
301
or
as an alternate, join sleeve to
6-8
LSC-2
301
front and back with a double
lapped double stitched seam
with the front and back
overlapping the sleeve 1/4 to
5/16 inch gage, 1/16 inch from
edge.
PREPARE HOOD OUTER
20
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business