MIL-DTL-6279M
NO.
OPERATION
STCH
SEAM/STCH
STITCHES PER
TYPE
TYPE
INCH
linings and hanger which
mouton be cut from ends.
c. INTERLINING. Cut the
quilted fabric by laying each
section of the pattern up or
down in the direction of the
warp, that is, each section of the
pattern may be placed with the
directional line pointing in
opposite warpwise directions.
d. DRILL CLOTH. The cotton
cloth drill fabric shall be cut as
specified for the outer-shell
fabric in operation 1a.
e. HOOD LINING. Synthetic
mouton shall be marked on the
reverse side from the pile side,
and the cut shall be made at
right angle to the back through
the pile.
f. At the time of cutting, replace
any part containing shade bars,
holes, or weakening defects
such as smashes, multiple
floats, and loose slubs, which
are likely to develop into a
hole.
g. Replace any part damaged
during the manufacturing
process by needle chew (which
may be expecting to develop
into a hole), scissor or knife
cuts, tears, holes, mends, or
burns.
h. Cut the synthetic fur Knit
cloth in the direction of the
wales (lengthwise) 3 ±1-
1/4inch wide and as required by
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business