MIL-DTL-6279M
NO.
OPERATION
STCH
SEAM/STCH
STITCHES PER
TYPE
TYPE
INCH
b. Sew the two pocket pieces on
the fronts, at the drill marks,
with a double row of stitching.
c. Cut the opening for the
pockets. Tongue notch each
corner.
10-12
LSq-2 (b)
301
d. Turn the pocketing through
the slit; double over at the front
edge for reinforcement, to form
a 7/8 inch welt. Raise stitch the
bottom of the welt with a single
row of stitching 1/16 inch from
the edge.
10-12
SSa-1
301
e. Sew the tongues at the
corners to the welt on the
inside, through the welt and the
facing with a single row of
stitching. The front shall
overlap the welt.
10-12
LSq-2 (b)
301
f. Raise stitch the seam joining
the faced pocket piece to the
front and the ends of welt with
a single row of stitching 1/16
inch from the edge. The front
shall overlap the faced pocket
piece.
10-12
SSa-1
301
g. Sew around the pocketing
with a single row of stitching
1/2 inch from the edge.
28 per brtck
brtck
h. Bartack the corners of the
pocket openings with a 7/8 inch
bartack at each end.
i. Stamp two buttons and snap
sockets, centered on each welt
with a 1/8 inch tolerance, 3-1/4
inches from each end of the
pocket opening. Stamp the
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business