MIL-DTL-6279M
Btnhl
-
Buttonhole
Incl
-
Including
Dbl
-
Double
Auto
-
Automatic
TABLE IV. Sewing Operations
NO.
OPERATION
STCH
SEAM/STCH
STITCHES PER
TYPE
TYPE
INCH
1.
Cutting
The material shall be cut in
accordance with patterns that
show size, shape, directional
lines for cutting, placement of
pockets, and notches for proper
assembling of all parts. The
directional lines for cutting
mouton shall not apply.
a. OUTER SHELL. The fabric
shall be cut face up or down.
Each ply of material shall be
laid with the face of the cloth
against the back of the next ply
below, or as an alternate
method, the cloth may be laid
face to face. When material is
spread face up, no stain
producing marking agent shall
be used in marking the top ply.
The finished parka shall have
the face side of the outer-shell
fabric on the outer side of the
garment. The inside of the roll
shall be considered the face
side of the material. Cut a 2-
1/4 inch by 2-1/4 inch piece of
basic cloth for the loop for
retaining the hood drawcord.
b. All parts of the outer shell
shall be cut from one piece of
material, except the pocket
facings, tunnel, hood facing for
synthetic mouton left side, flap
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business