MIL-DTL-6279M
NO.
OPERATION
STCH
SEAM/STCH
STITCHES PER
TYPE
TYPE
INCH
SSa-1
10-12
301
n. The corners of the pocket
openings shall be reinforced.
Cut a 1-1/4 inch square piece of
leather diagonally through the
center to form a triangle. Place
the long side of the triangular-
cut leather piece parallel with
the edges of the pocket flap,
and sew all around with a single
row of stitching of 1/8 to 1/16
inch from the edge. The leather
pieces shall cover the stitching
on each side of the pocket.
5.
JOINING OUTERSHELL
6-8
LSq-3 (a) and
301 or 401
10-12
LSq-3 (b)
a. Join the front and back side
seams with a single row of
stitching 1/2 inch from the edge
with the front overlapping the
back. Raise stitch 1/4 to 5/16
inch gauge, 1/16 inch from the
folded edge.
Or
6-8
LSc-2
301 or 401
b. Join the front and the back
seams with a double lapped
seam with the front overlapping
the back 1/4 to 5/16 inch gauge,
1/16 inch from folded edge.
28 per brtck
brtck
c. Position and bartack a 46-
inch drawcord to each side
seam of jacket (outershell) at
notches. The free ends of the
drawstring shall face toward the
front opening.
10-12
SSv-2
301
d. Turn the ends of the waist
tunnel strip in, and stitch the
strip with drawcord inserted
across the back between the
16
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business