MIL-DTL-44419A
Table II. Fabric, back of hand, requirements
Characteristic
Requirement
2
Weight
6.50 oz/yd + 5 %
Stretch
Warp
10-13 %
Filling
12-15 %
MVTR
Proc B
1,500 min.
Proc BW
11,000 min.
Abrasion Class 5
30,000 cycles
Colorfastness to Crocking
Wet
4.0 min.
Dry
4.0 min.
Water Repellency
100, 100, 90 min.
Tear Strength
Warp
25 lbs min.
Filling
9 lbs min.
1/ AATCC Evaluation Procedure 8, AATCC 9 Step Chromatic Transference Scale
3.3.3 Lining.
3.3.3.1 Backing and Facing lining fabrics. The backing fabric shall be a 2-bar tricot knitted
with nylon monofilament. The facing fabric shall be a fabric consisting of microdenier polyester
and Hydrophil® nylon or equal. The fabric shall meet the requirements in Table III when tested
as specified in 4.4.4. The polyester facing fabric shall be against the hand and shall be napped in
such a way that is comfortable and not clinging to the hand.
3.3.3.2 Index finger lining fabric. The index finger shall be lined with a thin fabric lining
conforming to the requirements for the facing fabric in 3.3.3.1 and Table III except for weight,
which shall be 4.0 6.5 oz/yd˛. The index finger shall have no insulation batt; facing fabric may
be laminated to itself for the index finger lining fabric. Testing shall be as specified in 4.4.4.
Table III. Lining fabrics requirements
Characteristic
Requirement
Backing
Facing
Index Finger
Color
Beige
Black
Black
Weight (oz/yd˛)
0.4 0.8
2.5 - 3.0
4.0- 6.5
Bursting Strength,
20
40
40
pounds (min.)
Abrasion
4.0 min. 9000 cycles
4.0 min. 9000 cycles
Pilling
4.0 min. 9000 cycles
4.0 min. 9000 cycles
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business