MIL-DTL-44419A
3.3.8 Elastic. The elastic take up for on the wrist side shall be 3/4 inch and placed across the
entire wrist piece of leather, 1/2 inch from base of leather. The elastic shall provide proper cinch
for snug fit (not too tight) at wrist and allows for easy don/doff. See 3.11.1.3 for stitch type.
3.3.9 Thread. The thread for stitching and hemming shall be nylon conforming to V-T-295,
Type II, Class B, with approved nonwicking finish, Size B, Foliage Green 504 in color. The
thread for stitching the lining unit and for attaching the lining to the waterproof insert shall be
nylon conforming to V-T-295, Type I or II, Class B, with approved non wicking finish, Size B,
natural in color. As an alternate, cotton-covered polyester thread conforming to of A-A-50199,
Tex Number 36-45 (Ticket #50) may be used for stitching the lining.
3.3.10 Nosewipe. The composition of the nosewipe material shall consist of a 100% Nylon
facing fabric and a base material made of 50% polyester 50% cotton. The color for the nosewipe
material shall be Foliage Green 504. The nosewipe material shall meet the requirements in Table
VII when tested as specified in 4.4.4. (See 6.9).
Table VII. Nosewipe composition material requirements
Characteristic
Requirement
6.6 oz/sq2
Weight
Colorfastness to Crocking
Wet
4.0 min. 1/
Dry
5.0 min. 1/
Tear Strength
3 lbs min.
Surface Abrasion
500 cycles, pass
Water Repellency
100, 100, 90 min.
1/ AATCC Evaluation Procedure 8, AATCC 9-Step Chromatic Transference Scale
3.3.11 Fleece snow cuff. The fabric for the fleece snow cuff shall be a polyester/nylon stretch
fleece consisting of a fiber blend of a blend of 56% polyester, 35% nylon and 9% spandex. The
fabric shall be treated with durable water repellency finish. The color shall be Foliage Green 504.
The fabric shall meet the requirements in Table VIII when tested as specified in 4.4.4.
Table VIII. Fleece snow cuff requirements
Characteristic
Requirement
Weight
12.5 - 13.5 oz./liner yard
Colorfastness to Crocking
Wet
3.0 min. 1/
Dry
4.0 min 1/
Stretch
.
Width
75% min.
Length
99% min.
Dimensional Stability
Length
5% max
Width
5% max
Pilling
4 min.
Water repellency
80, 80, 80 min.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business