MIL-DTL-44419A
1/ AATCC Evaluation Procedure 8, AATCC 9-Step Chromatic Transference Scale
3.4 Thermoregulation. The finished glove shall have a minimum overall insulation (clo) value
of 1.20 when tested as specified in 4.4.4.
3.5 Liner retention. The finished glove shall have no detachment/failure of the liner or
waterproof insert when tested for retention of the glove liner as specified in 4.4.4.
3.6 Whole glove leak test requirement. The finished glove shall pass the whole glove leak test
when tested as specified in 4.4.4.
3.7 Label. Each glove shall have a combination size and identification label, sewn-in at the
wrist cuff, conforming to Type VI, Class 4 of MIL-DTL-32075. The label shall show
colorfastness to laundering as specified therein. The label shall include the following information:
Gloves, Men's and Women's Intermediate Cold/Wet
Contract No.:
Contractor's Name:
Size:
3.8 Instruction slip. A printed slip of thin paper containing instructions as indicated below
shall be inserted in each right hand glove.
Instructions
1. Gloves are not designed for heavy work such as rappelling or barbed wire handling, for hot
work such as welding or changing machine gun barrels, or for use by POL handlers. Use other
handwear for such activities.
2. Wear gloves alone or with Glove Inserts, Cold Weather, Lightweight. Do not wear with
thicker inserts.
3. Fit gloves snugly but not tightly over the inserts.
4. Adjust strap for snug but not tight fit.
5. Gloves are available in 7 sizes: S XL-WIDE.
6. Gloves have waterproof/"breathable" linings but may become wet from perspiration - change
glove inserts when damp, and dry wet gloves and glove inserts away from flames or extreme heat.
7. Clean shells by placing gloves on hands and washing outside with cold water and mild
low-suds soap (such as liquid Woolite®), rinsing thoroughly. Do not machine wash. Do not use
detergents, solvents or bleach.
8. Treat outside of shells with fluorocarbon spray (such as Scotchgard® Leather Protector,
Nikwax); do not use oils, wax, polish, or silicone.
3.8.1 Bar code label/tag. Each item shall be individually bar coded with a paper tag for
personal clothing items. The paper tag shall be standard bleached sulfate having a basis weight of
100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and
direct printing. The tags shall have a hole and shall be attached to each pair of gloves by a
fastener. The tags shall be clearly legible and readable by scanner. The bar coding element shall
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business