MIL-DTL-85040D
Location
X-
Small
Medium
Large
Extra
Tolerances
Small
o. Width of 2-3/4
2-3/4
2-3/4
3
3
± 1/4
the Cuff
p. Length of 2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
± 1/4
the mock
turtleneck
3.6 Procedure of measurement. The drawers of the undershirt, as applicable, to be measured shall
be laid flat, face up, without tension, on a smooth, flat surface so that any creases or wrinkles
shall not affect the measurement.
3.6.1 Drawers. The drawers shall be measured in accordance with Figure 13, as follows:
a. Waist. Measure the width of the waist along the top edge of the relaxed elastic
waistband.
b. Back rise. Measure the back rise, along the seat, from the top of the waistband, at the
back, to the bottom folded edge at the crotch.
c. Length. Measure the length of each leg in a straight line, from the top edge of the
waist to the bottom edge of the cuff along the outer side of the leg.
d. Calf. Measure the width of each calf, at a point 10 inches up from the cuff attaching
seam, from side fold to side fold.
e. Fly opening. Measure the length of the fly opening
f. Cuff length. Measure the length of each cuff, from the attaching seam to the end of
the cuff.
g. Cuff width. Measure the width of the cuff, at the unattached end, from side fold to
side fold.
3.6.2 Undershirts. The undershirts shall be measured in accordance with Figure 14 as follows:
h. Body length. Measure the body length on the front, from the
collarette seam, at the shoulder, to the bottom edge of the undershirt
i. Body width. Measure the body width, one inch below the armhole seam, from side
fold to side fold, or from side seam to side seam, whichever is applicable.
j. Armhole. Measure the width of the armhole, from the sleeve inseam to the fold at the
shoulder.
k. Neck opening. Measure the width of the neck opening at the collarette attaching seam
from the side fold to the side fold of the collarette.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business