MIL-DTL-85040D
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2)
b. Conformance inspection (see 4.3)
4.2 First article inspection. When a first article is required (see 6.2), it shall be examined for the
requirements in table III. Failure of any test or presence of any major defect, to include
dimensional tolerances defects, shall be cause for rejection of the first article.
TABLE III. First article examination.
Inspections
Requirement
Inspection Method
Component and Material
3.2.1, 3.2.2, 3.2.3
4.4.1
Visual
3.3, 3.4, 3.7
4.4.2
Dimensional
3.5, 3.6, 3.7
4.4.3
4.3 Conformance inspection. Unless otherwise specified, conformance testing shall be
performed on production lot articles for the requirements in table IV. Sampling for inspection
shall be performed in accordance with ASQC Z1.4.
TABLE IV. Conformance inspection.
Inspection
Requirement
Inspection Method
Visual
3.3,3.4, 3.7, 3.8
4.4.2
Dimensional
3.5, 3.6
4.4.3
4.4 Inspection methods
4.4.1 Component and material inspection. In accordance with 4.1, components and materials
shall be inspected in accordance with the characteristics of table V.
Table V. Component and material inspection
Material
Characteristic
Reference
Test Method
Basic cloth
Material identification 3.2.1.1
All examinations and
tests specified in
MIL-C-85038
Webbing
Material identification 3.2.2
All examinations and
tests specified in JJ-
W-155
Thread
Material identification 3.2.3
All examinations and
tests specified in A-A-
55217
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business