MIL-DTL-29112D
3.3.4 D-ring. The nonmagnetic d-rings shall be black acetyl, size 1-inch and shall conform to
Figure 2. (see 4.4.1 and 6.5).
3.3.5 Gimp. The gimp used for reinforcing the buttonholes shall be cotton, soft finish, vat
dyed, size 8, 3-ply (min.) and shall be a good match to the basic material. The direction of the final
twist shall be "S" (see 4.4.1).
3.4 Description. The semi-boxer type swimmers trunks shall have a waistband with attached
1/2 belt straps. There shall be two belt loops on the left front and the left belt shall loop through the two
D-ring closures on the right belt for fit adjustment. The trunks shall have a button fly. The button fly
shall have buttons placed one (1) on the inside left waistband and three (3) on the right fly. The trunks
shall have a patch pocket on the back right side.
3.4.1 Performance requirements. The overall design of the semi-boxer type swimmers trunks
shall be suitable when worn alone or under a wet suit and shall be static free. The trunks shall be non-
chaffing and non-pinching under pressure of the wet suit and have a low noise signature closure systems
that allows for adjustability and access for a catheter.
3.5 Patterns. Standard patterns shall be furnished to the contractor for use in cutting working
patterns (see 6.4). The working patterns shall be identical to the government patterns. The standard
patterns shall not be altered in any way and are to be used as a guide form making the contractor's
working patterns. The working patterns shall be identical to the standard patterns. The patterns
provide for a 1/2 inch seam allowance for all doubled lapped and double stitched seams 3/8 inch for
waistband, waistband attachment, pocket and belts.
3.5.1 List of pattern parts. The pattern parts and cutting quantities for the trunks shall
be as listed in Table II.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business