MIL-DTL-83776B (USAF)
19 March 2001
SUPERSEDING
MIL-H-83776A(USAF)
28 June 1985
DETAIL SPECIFICATION
HELMET, FLYER'S, WINTER
This specification is approved for use by the Department of the Air Force, and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers type B-9B flyer's helmet
1.2 Classification. The helmet will be furnished in the following sizes (see 6.2).
Size
Equivalent Size
Small
23 + 1/2 inch
Medium
24 + 1/2 inch
Large
25 + 1/2 inch
Extra large
26 + 1/2 inch
1.2.1 The size measurements of the finished helmets will be in strict accordance with the measurements
specified above and in the tabulation block of AF Drawing 51D24313. Measurements will be taken
with the ear flaps up on the crown.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Supply Center Philadelphia, Clothing
and Textiles Directorate, ATTN: DSCP-CRFD, 700 Robbins Avenue, Bldg 6D, Philadelphia, PA
19111-5094 by using the Standardization Document Improvement Proposal appearing at the end of this
document or by letter..
AMSC N/A
FSC 8415
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business