MIL-DTL-44312C
3.5.1 Identification label. The identification label shall conform to class 1 and shall contain the
following information:
VEST, CONDITIONING MICROCLIMATE: AIR
CONTRACT NUMBER
NATIONAL STOCK NUMBER
MANUFACTURER
3.5.2 Instruction label. The instruction label shall conform to class 3 and shall contain the
following information:
VEST, CONDITIONING MICROCLIMATE: AIR
(1) Vest with manifold attached is worn over undershirt. Close front zipper and adjust side
straps for snug fit. Hose and connector are to exit out from under other clothing layers, as
required, either from right or left side.
(2) Attaching manifold to vest:
(a). Attach round manifold with hook and pile fastener tape to center of back side of vest.
(b). Attach front manifold with hook and pile fastener tape below slide fastener.
(c). Secure all hoses to vest with hook and pile fastener tape straps.
(3) Vest without its manifold assembly may be hand washed using warm water with soap or
detergent. To dry, hang and allow to air dry.
DO NOT REMOVE THIS LABEL
3.5.3 Bar Code Label/Tag. Each item shall be individually Bar-coded with a Type VIII, class
17, Label/Tag of DDD-L-20. The Label/Tag shall be located so that it is completely visible on
the item when it is folded and/or packaged as specified and shall cause no damage to the item.
3.6 Workmanship. The vest shall conform to the quality of product established by this
specification.
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are classified as
follows:
a. First article inspection (see 4.2).
b. Quality conformance inspection (see 4.3).
4.2 First article inspection. When a first article is required (see 3.1 and 6.2), it shall be
examined for the defects specified in 4.4 and 4.4.1. Any nonconformance shall be cause for
rejection of the first article.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business