MIL-DTL-81188C
TABLE II. End item tests (cont'd)
Characteristics
Requirement
Test Method
THREAD
Breaking Strength
3.3.5
ASTM-D-2256
Colorfastness to laundering
3.3.5
AATCC 61
(after 3 launderings)
Elongation
3.3.5
ASTM-D-2256
Break Strength after heat aging
3.3.5
ASTM-D-2256
4.5 Conformance inspection. Sampling for inspection shall be performed in accordance with
ASQC Z1.4, except where otherwise indicated. When First article is waived all test in 4.3 apply.
4.5.1.1 Visual examination. The glove shall be examined for the defects listed in accordance with Table III.
Table III. Classification of End Item Visual Defects
Examine
Defect
Classification
Major Minor
GENERAL
Any hole, other than needle hole
101
scissors or knife cut, tear, mend,
or burn
Any weakening defect such as a
102
smash, multiple float, loose slub,
needle chew, or abraded area 1/
Needle holes:
Five to 10
201
More than 10
103
Color of any component not as
104
specified, not uniform, any outside
part shaded, or contains any shade
bar 1/
Two or more thread ends not trimmed
202
or two or more thread scraps not
removed from the glove
Any spot or stain 1/
105
Any portion of the leather or cloth
106
stiffened or scorched by any process
of manufacturing
Two or more ragged edges on the
203
outside of the glove
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business