MIL-DTL-81188C
3.4.5 Figures. The figures are furnished for information purposes only. When inconsistencies exist between
the written specification and the figures, the written specification shall govern.
3.5 Label/tag. Each item shall be individually bar-coded with a tag for personal clothing items. The tags
shall be attached to each item, and shall be clearly legible and readable by a scanner. The bar coding
element shall be a 13 digit national stock number (NSN). The barcode type shall be a medium to high code
density and shall be located so that it is completely visible on the item when it is folded and/or packaged as
specified.
3.5.1 Instructions. A lightweight, white, paper, instruction label with legible and durable black characters
shall be inserted into each right hand glove in such a manner as to prevent loss when being handled or
packaged. The size of the paper label shall be approximately 2-1/2 by 5 inches. The label shall contain the
following information:
WASHING INSTRUCTIONS- GLOVES, FLYER'S SUMMER, GS/FRP-2
1. The gloves may be washed with mild soap in water
not over 1200F in temperature.
2. Rinse thoroughly, then stretch into shape.
3. Drip dry or wrap in a towel. Do not wring or twist
dry. Do not expose to hot air or full sunlight.
3.6 Patterns. The Government shall furnish a complete set of patterns or a master pattern with grade rules,
to maintain uniformity and consistency in manufacturing. The government patterns shall be used to create the
contractor's working patterns. Minor modifications are permitted to accommodate manufacturing
procedures, however, the design and finished measurements must be maintained.
3.7 Workmanship. The finished gloves shall conform to the quality of the product established by this
document. (See 4.4.1.1)
4. VERIFICATION
4.1
Classification of inspections. The inspection requirements specified herein are classified as follows:
a. First article inspection (see 4.2)
b. Qualification inspection (see 4.3)
4.2
First article inspection. First article inspection shall be performed on the gloves when a first
article is required (see 3.1). This inspection shall include the test methods in 4.4 and the examination
specified in 4.5.
4.3 Qualification inspection. In accordance with 4.1, conformance inspection shall be in accordance with
4.5. Where certificates of compliance are submitted, the government reserves the right to check test such
items to determine the validity of the certification.
.
4.4 Test methods. The finished basic material shall be tested for the characteristics listed in Table II.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business