MIL-DTL-81188C
Table III Classification of End Item Visual Defects cont'd
Examine
Defect
Classification
Major Minor
SEAMS AND
STITCHING
Distance between the two rows of
122
stitching attaching the thumb
and gauntlet continuation of the
thumb less than 1/32 inch or more
than 5/32 inch
Any open seam 4/
123
Seam and stitch type
Not specified seam or stitch 1/
124
Any looper thread on the
125
outerside of any glove seam,
when stitch Type 401 is used
Stitch tension
Any loose stitching 1/ 5/
126
Any tight stitching, resulting
127
in breaking of the stitches,
when normal pull is applied 6/
Stitches per inch 7/
Stitches more or less than
specified
Two stitches
204
More than two stitches
128
PAIRING
Not right and left glove of the
129
same size or wide variation in
appearance
Not tacked or joined together
205
as specified
MARKINGS
Any missing, or size incorrect,
130
incomplete, or illegible
Other than the size information,
206
incorrect, incomplete, or illegible
Improperly located or any
131
strike-through 1/
1/ The defect shall be classified as major, when it seriously affects the serviceability or appearance, otherwise
it shall be classified as a minor defect.
2/ One or two single pick runs on the innerside of a glove shall not be classified.
3/ The gage of stitching defect shall be classified only, when the condition exists on the major portion of the
seam.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business