MIL-DTL-3866H
ASTM INTERNATIONAL (ASTM)
ASTM-D-3776
Mass per unit area (weight) of fabric
ASTM-D-3887
Standard specification for tolerances for knitted fabrics
ASTM-D-3787
Bursting strength of knitted goods consistent rate of
traverse (CRT) ball test
ASTM-D-629
Quantitative analysis of textiles
ASTM-D-6193
Stitches, seams and stitchings
(Application for copies should be addressed to, ASTM International, 100 Barr Harbor
Drive, PO Box C700, West Conshohocken, PA 19428-2959 or online at www.astm.org.)
AMERICAN SOCIETY FOR QUALITY
ANSI/ASQC Z1.4 Sampling Procedures And Tables For Inspection By Attributes
(Applications for copies should be addressed to; ANSI/ASQC, American Society for
Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203.)
Order of Precedence. In the event of a conflict between the text of
*
2.4
this document and the references cited herein (except for related specification sheets),
the text of this document will take precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3.
REQUIREMENTS
3.1
First article. When specified (see 6.2), a sample shall be subjected to first
article inspection (see 4.2 and 6.2).
3.2
Guide samples. Guide samples, when furnished, are solely for guidance
and information to the contractor (see 6.3). Variations from this document may appear
in the sample in which case this document shall govern.
3.3
Material. (See 6.4).
3.3.1. Fabric. The fabric for the gloves shall be a plain (jersey) circular knit
fabric made with singles cotton yarn. The finished fabric shall be scoured and
bleached. The use of optical bleaches (brighteners) is prohibited. The finished fabric
shall conform to the following physical requirements when tested as specified in
4.2.1.1:
a. Weight per square yard, minimum
-
3.4 ounces
b. Wales per inch, minimum
-
28
c. Courses per inch, minimum
-
26
d. Bursting strength, minimum
-
50 pounds
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business