MIL-DTL-14610H
ASTM-D6413 Standard Test Methods for Flame Resistance of Textiles (Vertical Test)
ASTM-D1424 Tearing Strength of Woven Fabrics by Falling-Pendulum Type (Elmendorf)
Apparatus
ASTM-D2256 Tensile Properties of Yarns by the Single-Strand Method
(Application for copies should be addressed to American Society for Testing and
Materials, 100 Barr Harbour Drive, West Conshohocken, PA 19428)
AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)
PUBLICATION
AATCC-96 Dimensional Changes in Commercial Laundering of Woven and Knitted Fabrics
Except Wool
AATCC-81 pH of Water-Extract from Bleached Textiles
AATCC-70 Water Repellency: Tumble Jar Dynamic Absorption Test
(Applications for copies should be addressed to American Association of Textile
Chemists and Colorists (AATCC) P.O. Box 12215, Triangle Park, NC 27709-2215)
3. REQUIREMENTS
3.1 First article. When specified, a sample shall be subjected to first article inspection in
accordance with 4.2.
3.1 Design and construction. The coveralls shall have a topstitched collar, long sleeves with
hook and loop adjustment tabs, a lattice hip pocket on the right back side as worn, a hanger loop
with a 2 to 3 inch free opening and side pass throughs. The front opening and side pass throughs
shall have hook and loop fastener tape extending down the entire opening for quick removal.
3.1.1 Lattice pocket. Tools weighing up to 8 pounds such as hammers and wrenches shall be able
to hang from the open structure pocket. The pocket shall finish 7 to 7-1/4 inches wide and 7-1/2
to 7-3/4 inches long with the raw edges are turned under and stitched. The lattice strips shall
measure 5/8 to 1 inch wide.
3.1.2 Seams and stitching. All seams shall be 10-11 stitches per inch for strength. All edges shall
be overedged or otherwise clean finished. All hems shall be clean finished with raw edges
turned in.
3.1.3 Bartacking. A 1 inch bartack, containing a minimum of 42 stitches shall be located 1/4 +
1/16 inch below the slide fastener tape across the crotch seam (see figure). 1/2 horizontal
bartacks shall be located at the crossings of each vertical and horizontal strip on the lattice
pocket.
3.2 Basic material. The fibers shall be made from cotton which has been spun into singles yarn.
The weave for the material shall be a five harness sateen cloth. The use of substances containing
elementary sulfur compounds capable of oxidation to sulfuric acid is prohibited. The filling
effect side of the natural color cloth shall be the face side. The material shall meet the following
requirements in Table I:
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business