A-A-55063A
5.2 Visual examination. Each apron shall be examined for the defects listed in Table V.
TABLE V. Visual examination defects
Material defects
Any hole, cut, abraded area, tear or rip; any spot or stain or foreign matter on outside; any
peeling, cracking, sticking, flaking or excess of coating compound. Any blisters, pits,
abrasions or tackiness. Color not as specified or not uniform due to discoloration, any
shaded part, any objectionable odor
Seams and stitching
Loose or tight stitching tension, broken or missing thread or stitch, needle chew or improper
stitching; any open seams, any part caught in an unrelated operation or stitching; raw edge,
thread breaks, thread ends not removed; pulled or snagged stitches
Workmanship
Any component part omitted, dusting powder omitted, measurement of item not as specified;
design not as specified.
Labels
Label(s) missing, incorrect, or illegible; bar code or UPC code label (when required, see 7.6)
omitted or not readable by scanner; human-readable interpretation (HRI) omitted or illegible;
bar code not visible on folded, packaged item; bar code label causes damage to the item.
Packaging
Not packaged in accordance with the contract or purchase order.
5.3 Dimensional examination The finished apron shall conform to the dimensions specified
in 3.5 and Figure 1. Any dimension that is not within tolerance shall be classified as a defect.
5.4 Toxicity test. When required (see 7.6), an acute dermal irritation study and a skin
sensitization study shall be conducted on laboratory animals. When the results of the studies
indicate the apron is not a sensitizer or irritant, a Repeat Insult Patch Test shall be performed in
accordance with the Modified Draize Procedure (see 7.1.2.3). If the toxicity requirement (see
3.6) can be demonstrated with historical use data, toxicity testing may not be required.
5.5 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase
order.
6. PACKAGING.
6.1 Packaging. Preservation, packing, and marking are as specified in the contract or order
(see 7.4).
7. NOTES.
7.1 Sources of documents.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business