A-A-52087A
MATERIAL.
*Yarn. The yarn for knitting the gloves shall be a 55% acrylic, 25% wool, and 20% hollow-core polyester blend. Acrylic staple, wool, and polyester staple shall be blended, spun, and twisted into a 2/24 worsted count yarn with 10.5 turns per inch for the singles and 5.5 turns per inch for the ply. The acrylic shall be 3 denier 4-1/2 inches nominal staple. The wool shall be virgin fleece not lower in grade than 54’s U.S. standard. The polyester shall be 5.5 denier, 12 to 18% void, 4-1/2 inches nominal staple.
Elastic yarn. The elastic yarn for every other course of the cuff shall be made of spandex 210 denier (nominal size) with an inner and outer covering of 100 denier, 2 ply stretch nylon yarn.
*Color. The color of all parts of the finished glove shall approximate Brown 436. The dyed glove inserts shall conform to the standard sample for shade and shall show good fastness to laundering and perspiration when tested in accordance with test methods 5614 and 5680 of FED-STD-191.
*Dimensions. The dimensions of the finished gloves shall be as specified in Table 1. In addition, the glove insert shall be constructed so that the thumb length shall be 85-90% of the middle finger length, the third finger shall be approximately 90% of the middle finger length, and the fourth finger length shall be approximately 72% of the middle finger length.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business