[INCH-POUND]
A-A-50379
29 August 1990
COMMERCIAL ITEM DESCRIPTION
MITTEN SHELLS, MEN’S
This Commercial Item Description is authorized for use in preference to MIL-M-18203.
1. ABSTRACT
1.1 Scope. This commercial item description covers the requirements for a men’s leather work mitten shell of one type and size only to be worn over knit in cold weather.
2. SALIENT CHARACTERISTICS
2.1 Design and construction. The mitten shells shall be leather and shall be an unlined “Chopper” type with a continuous thumb and a buckle strap wrist closure (see Figure 1). All seams shall be on the inside of the mitten shell.
2.2 Material.
2.2.1 Leather. The leather used for the mitten shall be full grain chrome tanned cowhide bends conforming to type II, class B of MIL-L-40051. The color of the leather shall be cream.
2.2.2 Loop and buckle strap. The loop and buckle strap shall be leather as specified in 2.2.1 or 5/8 inch tape conforming to type I, Class 1 or 3 of MIL-T-43566. The tape may be water repellent treated and when class 3 is used, the color shall be olive drab.
2.2.3 Buckles. The buckles shall be steel, 5/8 inch, double bar, tongueless, lip type II, style 3, class 3 of MIL-B-543.
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile Research Facility, P.O. Box 59, Natick, MA 01760-0001 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release, distribution is
unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business