MIL-DTL-43976D
Stock number: 8415-00-000-0000 (Example)
Nomenclature: Gloves, Chemical Protective, Type II (Example)
Specification number: MIL-DTL-43976 (Example)
Size: Large (Example)
Contract number and date: SPO100-00-C-0000 01/01 (Example)
Contractor's name:
Date of manufacture (month and year): 02/01 (Example)
The marking shall remain legible when tested as specified in 4.4.5.
3.8 Instruction sheet. A paper instruction sheet shall be placed inside each pair of gloves. The
size of the characters shall be ¼ inch (18 point) for headings and 1/8 inch (10 point) for instructions.
The instruction sheet shall contain the information listed below:
GLOVES, CHEMICAL PROTECTIVE
GENERAL INSTRUCTIONS
a. These gloves are to be worn in the event chemical protection (CB protection) is
required.
b. When wearing the gloves with Clothing Outfit, Chemical Protective, wear over the
liner shirtsleeve and under outer shirt or coat.
c. When wearing gloves with Suit, Chemical Protective, wear under the sleeve of the
coat.
d. For maximum durability and when working with sharp objects, wear leather gloves
over the chemical protective gloves.
e. In the event the chemical protective gloves become contaminated, do not under any
circumstances wear leather gloves over them.
f. In cold weather, wear environmental hand gear over these gloves.
g. Periodically inspect the chemical protective gloves for holes or punctures. In the event
they do develop holes, are punctured, or become torn, discard immediately and
use a serviceable pair.
h. With proper care, the gloves are capable of providing protection for at least 14 days of
continuous wear.
i. Wear cotton gloves under your chemical protective gloves to assist in the absorption of
moisture to retain comfort.
DECONTAMINATION OF GLOVES
a. Gloves exposed to toxicological agents must be decontaminated before reuse. The
gloves can be decontaminated by using the procedures specified in FM 3-5, NBC
Decontamination.
b. Should your gloves become contaminated with gasoline, oil, grease or cleaning fluids,
wipe-off and air dry within 2 minutes. If gloves cannot be wiped off and air-dried
within 2 minutes they should be replaced at the earliest possible time.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business