MIL-DTL-43976D
*6.1 Intended use. The Type I glove sets and types II and III gloves are intended for use with
other Chemical Protective Clothing (coats, trousers and underwear). The gloves provide protection
from hazardous chemicals when worn with chemical protective suits and outfits.
*6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification.
b. Special provisions for verification inspection of Life Support
Clothing and Equipment (see 1.1).
c. Type and size required (see 1.2).
d. Issue of DODISS to be cited in the solicitation, and if
required, the specific issue of individual documents
referenced (see 2.1.1 and 2.2).
e. When first article is required (see 3.1, 4.2 and 6.3).
f. Levels of preservation and packing (see 5.1).
*6.3 First article. When a first article is required, it should be inspected and approved under
the appropriate provisions of FAR 52.209. The first article should be a preproduction sample. The
contracting officer should specify the appropriate type of first article and the number of units to be
furnished. The contracting officer should also include specific instructions in acquisition documents
regarding arrangements for selection, inspection and approval of the first article.
6.4 Sample. For access to standard sample, address the contracting activity issuing the
invitation for bids.
*6.5 Glove forms. Blocks and casings for the glove forms used in the dipping process are
Government owned and are stored at the General Porcelain Manufacturing Company. Inc., Justrite
Ceramics Division, 951 Pennsylvania Avenue, Trenton, NJ 08638, (609)-396-7588. Forms for the
gloves may be purchased from this company.
*6.6 Marking ink. Markem JXN-7410-H-White or Yellow, made by Markem Corporation,
P.O. Box 2100, Keene, NH 03431 (603)-352-1130, has been found to be suitable when dried under
infrared light for 24 hours.
*6.7 Government acceptance tests (see 4.4.5.2) Direct all government acceptance tests to:
Battelle Labs
1425 State Route 142 JST-1
West Jefferson, OH 43162
* 6.8 Surveillance program. Items to be set aside for surveillance (twelve (12) pairs of gloves
of each type per lot) should be shipped separately to the address below:
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business