A-A-50355B
Material. The gloves shall be manufactured from plain or jersey knit fabric, 100% cotton, natural color.
Sizes. The gloves shall be provided in the following sizes:
|
Men’s |
Women’s |
||
|
Medium |
Large |
Medium |
Large |
NOTE: The gloves are ordered by size, therefore the sizes medium and large may be abbreviated as MED and LG.
Label/marking. In addition to any commercial markings, each glove shall be legibly stamped. The stamp shall be located on the outside of the glove containing the contractor’s name, contract number, size, NSN and fiber content.
Patterns. Patterns will be developed by the contractor to meet the specified finished requirements.
Abrasion Resistance. The finished gloves shall show no evidence of break thru on the coated fabric after the surface is abraded 500 cycles when tested in accordance with FED-STD-191, Test Method 5306 with a 1000 gr weight on each H-18 Wheel. The test shall be conducted on the coated side of the cloth and the evaluation performed from the uncoated side.
Sizes and Measurements. The finished gloves shall conform to the measurements below (in inches):
|
|
Men’s |
Women’s |
||
|
Medium |
Large |
Medium |
Large |
|
|
(A) Overall length (Min.)(Cuff edge to tip of second finger) |
9-1/8 |
9-5/8 |
9-1/8 |
9-5/8 |
|
(B) Palm width (Min.) (At thumb crotch from folded edge to folded edge |
4-1/8 |
4-3/8 |
3-1/2 |
3-5/8 |
Note: A minimum measurement for the middle finger of each glove shall have a dimension of three inches when measured from the crotch of the finger to the tip. Refer to Figure 1 for location of (A) and (B) measurements.
Workmanship. After completion, the finished gloves shall be thoroughly cleaned and all loose thread, lint, and foreign matter removed.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business