A-A-50016B
3. REGULATORY REQUIREMENTS. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.
4. QUALITY ASSURANCE PROVISIONS
4.1 Product conformance. The products provided will meet the salient characteristics of this commercial item description and will conform to the producer's own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance.
4.2 Examination. Each glove will be inspected for visual and dimensional attributes in accordance with ANSI/ASQC Z1.4 - Sampling Procedures and Tables for Inspection by Attributes, published by the American Society for Quality Control. The lot size will be expressed in units of one glove. The sample unit will be one glove and the selection will be by pairs.
4.2.1 Visual examination. Each glove will be examined for the defects listed below:
Any hole, cut, or tear; color not as specified; any part shaded; any spot or stain (outside); raw edges, open seams, thread ends not removed, or loose tension resulting in loose seams; any material defects, distorted parts or poor workmanship; any component part omitted; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. (Up to 3 needle holes are acceptable).
4.2.2 Dimensional examination. The gloves will be measured for overall length, hand length and hand width for conformance to the dimensions listed in 2.3.
4.3 Acceptance criteria. Acceptance criteria will be as specified in the contract or purchase order.
5. PACKAGING. The preservation, packing, and marking will be as specified in the contract or order.
Source: https://assist.dla.mil -- 3Downloaded: Check the source to verify that this is the current version before use.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business