INCH/POUND A-A-50016B MAY 18, 2001
SUPERSEDING A-A-50016A JAN. 8, 1990
COMMERCIAL ITEM DESCRIPTION
GLOVES, MEN'S; CLOTH, LEATHER PALM, KNITTED WRISTLET, SIZE MEDIUM
The General Services Administration has authorized the use of this commercial item description as a replacement for Type II, Class 1 of JJ-G-451.
1. SCOPE. This document covers medium size men's gloves.
2. SALIENT CHARACTERISTICS
2.1 Description. The gloves will utilize the Gunn pattern, with a leather palm and knitted wristlet.
2.2 Material.
2.2.1 Leather. The leather for the palm, the front of fingers, the front and back of the thumb, the back of the finger tips and protective welt for seam joining front of fingers (fourchettes) to the palm will be chrome tanned, flesh split from cattlehide bends. Middle splits, head splits, belly splits and shoulder splits will not be used. All leather parts, except the welt, shall be 2-1/2 to 3-1/2 ounces thick when tested as specified in
ASTM-D-1814. (Note: One ounce is equivalent to 1/64 inch). The welt will be 1-1/2 to 2-1/2 ounces thick when tested as specified in ASTM-D-1814.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DPSC-COCT, 700 Robbins Avenue, Philadelphia, PA 19111-5092.
AMSC N/A FSC 8415
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business