A-A-55202A
4.3 Warranty. The item offered shall include the standard warranty given to the commercial
market beginning with the date of delivery of the individual item.
4.4 Visual examination. The helmet shall be examined for the defects listed below.
4.4.1 Defects. The helmet shall be examined for the following defects:
4.4.1.1 Suspension system: Any cut, tear or hole; headband or sweatband not replaceable
type, i.e., cannot be removed; headband cannot be adjusted within the specified range; width
of chin strap or headband less than specified; exposed ends of nylon webbing not fused (when
applicable); color of any component not as specified.
4.4.2.2 Ear and neck flap: Not removable; not color specified.
4.4.2.3 Hardware: Broken or malformed, corroded, sharp edge or burr; any component
improperly installed causing failure to serve intended purpose; on painted components - any
flaking, peeling, orange peel, sags, runs or scratches exposing base metal; any snap fastener,
eyelet, or rivet insecurely clinched or peened to the degree that separation may occur from the
assembly, or excessively clinched or peened to the degree that materials are damaged; any
snap fastener that does not function properly, i.e., fails to snap closed, or provide a secure
closure or open freely.
4.4.2.4 Shell: Color not as specified or not uniform; any hole (other than required for
assembly of suspension system to shell), any sharp edge or burr, any dimension that is not
within the established tolerance.
4.4.2.5 Face shield: Not adjustable to any position or cannot be secured in a set position; any
pit, bubble, scratch, void or blister, any crack, hole or break, not clear transparent.
4.4.2.6 Stitching: Thread breaks, or two or more consecutive skipped or runoff stitches not
overstitched; thread ends not removed, no puckering of materials from loose stitch tension.
4.4.2.7 Identification markings: Label/markings missing, illegible, incorrect.
4.4.2.8 Cleanness: Grease or oil spot or stains on any component on inside and outside.
5. PACKAGING
5.1 Preservation, packing, and marking. The preservation, packing, and marking shall be as
specified in the contract or purchase order.
6. NOTES
6.1 Figures. Figure 1 and 2 are furnished for information purposes only. If there are any
inconsistencies between the written document and the figure, the written document shall
govern.
6.2 NIB/NISH agencies otherwise qualified to supply this item shall be exempt from the
requirements of 4.2 thru 4.2.4.
6.3 Source of Government documents. Copies of military and Federal documents are
available from:
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business