A-A-50358C
TABLE II. Measurements
Sizes |
Chest (A) (1/2 circumference) |
Leg (B) inseam length |
Sleeve (C) length |
Body (D) length |
Underarm width (E) |
Leg (F) opening |
Slide (G) fastener |
X-Small |
20 |
31-1/2 |
33-1/2 |
35-1/2 |
20-3/4 |
19-1/2 |
27 |
Small |
22 |
32-1/2 |
34-1/2 |
36-1/2 |
21-3/4 |
19-1/2 |
29 |
Medium |
24 |
33-1/2 |
35-1/2 |
38 |
23-1/4 |
20-1/4 |
30 |
Large |
26 |
34-1/2 |
36-1/2 |
40 |
24-1/2 |
21 |
31 |
X-Large |
28 |
35-1/2 |
37-1/2 |
41 |
25-3/4 |
21-3/4 |
32 |
XX- Large |
30 |
37 |
38-1/2 |
43 |
27-1/4 |
21-3/4 |
33 |
+ 1/2 |
+3/4 |
+ 1 |
+ 1 |
+ 1/2 |
+ 1/2 |
+ 1/2 |
Note: Refer to Figure 1 for A, B, C, D, E, F, and G.
3.8 Label/tag. Each item shall be individually bar-coded with a tag for personal clothing items. The non-permanent tags shall be attached to each item, and shall be clearly legible and readable by a scanner. The bar coding element shall be a 13 digit national stock number (NSN). The bar- code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified.
4. REGULATORY REQUIREMENTS
4.1. Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantages life cycle costs.
5. QUALITY ASSURANCE PROVISIONS
5.1 Product Conformance. The products provided shall meet the salient characteristics of this CID, conform to the producer's own drawings, specifications, standards and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5.1.2 Visual examination. Each liner shall be examined for the defects listed below:
Material defects
Cloth-Any hole, cut, tear, mend, burn, needle chew, any imbedded foreign matter; overall uncleanness; objectionable odor.
Slide fastener-omitted, malformed or damaged.
Major
101
102
Minor
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business