wet glove constructed with stretch fabric on the back of the hand, leather palm, waterproof insert and an insulated lining.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

INCH-POUND

MIL-DTL-44419A

12 APRIL 2006___

SUPERSEDING

MIL-G-44419

23 November 2005

DETAIL SPECIFICATION

GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET

This specification is approved for use by all Departments and Agencies of the Department of

Defense.

1. SCOPE

1.1 Scope. This specification covers one type of men's and women's intermediate cold/wet

glove constructed with stretch fabric on the back of the hand, leather palm, waterproof insert and

an insulated lining.

1.2 Classification. The gloves will be of the following sizes as specified (see 6.2).

Schedule of Sizes

X-Large

X-Large - Wide

Large

Large - Wide

Medium

Medium - Wide

Small

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this

specification. This section does not include documents cited in other sections of this specification

or recommended for additional information or as examples. While every effort has been made to

ensure the completeness of this list, document users are cautioned that they must meet all specified

requirements of documents cited in sections 3and 4 of this specification, whether or not they are

listed.

Comments, suggestions, or questions on this document should be addressed to: Defense Supply Center

Philadelphia, Clothing and Textiles Directorate, Attn: DSCP Standardization Team, 700 Robbins Ave.,

Philadelphia, PA 1911-5096. Since contact information can change, you may want to verify the currency

of this address information using Acquisition Streamlining and Standardization Information System

(ASSIST) online database at https://assist.daps.dla.mil.

AMSC N/A

FSC 8415