INCH-POUND
MIL-DTL-29112D
27 APRIL 2000
SUPERSEDING
MIL-T-29112C
3 MARCH 1987
DETAIL SPECIFICATION
TRUNKS, SWIMMERS
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This detail specification covers one type of swimmers trunks for use by
Personnel of the Department of Defense.
1.2 Classification. The trunks maybe one type in the following sizes:
28, 30, 32, 34, 36, 38 and 40.
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure
the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of
use in improving this document should be addressed to: Defense Supply Center Philadelphia, Clothing
and Textiles Directorate, Attn: DSCP-CRFD, 700 Robbins Ave., Philadelphia, PA 19111, by using the
Standardization Document Improvement Proposal
(DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 8415
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business