[INCH-POUND]
A-A-50364A
7 January 1991
SUPERSEDING
A-A-50364
12 February 1985
COMMERCIAL ITEM DESCRIPTION
TROUSERS, RADIOACTIVE CONTAMINANTS PROTECTIVE (VINYL)
This Commercial Item Description is authorized for use by all Departments and Agencies of the Department of Defense.
Description. The waist of the trouser shall be finished with elastic leg openings may be finished with or without elastic. The elastic at the openings shall be attached with a seam or the elastic may be encased in heat sealed tunnels. The joining seams shall be heat sealed (non-embossed) to finish on the inside of the garment.
Material. The trouser shall be made of a yellow plastic film, flexible, vinylchloride, 0.0080 (+ 0.0008) inch thick, conforming to type I, class 2 of L-P-375, except that the requirements for extraction in soapy water, volatility, resistance to weathering, cold crack, and lacquer lifting shall not apply. No pinholes are allowed.
Sizes and measurements. The trouser shall be one type in one size. All measurements and tolerances are expressed in inches. The finished trousers shall have the following dimensions when measured flat:
Waist (fully expanded across top)-24
Seat (6 inches down from top)-25-1/2
Length (from top waistband to crotch joining seam)-17
Leg
Inseam- 28
Width (6 inches up from bottom)- 14
Width (at crotch joining seam)- 16
Tolerances- + 1
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Officer in Charge, Navy Clothing and Textile Research Facility, Post Office Box 59, Natick, MA 01760-0001 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business