[INCH-POUND]
A-A-50355B
17 JULY 1992
SUPERSEDING
A-A-50355A
10 APRIL 1989
COMMERCIAL ITEM DESCRIPTION
GLOVES, MEN’S AND WOMEN’S CLOTH, VINYL COATED
The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-G-29114.
Salient Characteristics. The gloves are to be used by ammunition and pyrotechnic material handlers. The gloves shall be constructed from a two piece cut and sew process, or fully fashioned from plain or jersey knit fabric, 100% cotton and polyvinyl chloride dipped. All seams shall be to the inside of the glove. Seam allowances shall be minimum. The coating compound will cover the entire outside surface of the glove and be suitably compounded to provide a good gripping surface, and abrasion resistance for the finished glove. The gloves shall be furnished in medium and large sizes for both men and women. The color of the finished glove shall be tan/yellow. The gloves shall be paired by a commercially accepted method.
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business