[INCH-POUND]
A-A-52087A
22 July 1992
Superseding
A-A-52087
10 Dec. 1990
COMMERCIAL ITEM DESCRIPTION
GLOVE INSERTS (COLD WEATHER)
The General Services Administration has authorized the use of this Commercial Item Description.
Abstract. This description covers the requirements for glove inserts which are intended for use by all Military services.
Classification. The glove inserts shall be in the following sizes:
Small, Medium, Large
SALIENT CHARACTERISTICS
*Description. The glove inserts shall be ambidextrous design with knitted hands, fingers and thumbs. All parts of the glove insert with the exception of the cuffs shall be knit seamless with a plain (jersey) stitch. The cuffs shall be knit seamless with a mock rib with an elastic yarn laid in every other course and two elastic yarns inserted around the edge of the cuff. The two elastic yarns shall be overedged stitched twice around and overlapped not less than 1/4 inch. The gloves inserts shall be knit with one end of yarn as specified and shall be made on a fully automatic, 84 needles (Per Side), 13 cut flat bed knitting machine.
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business